This sequence will illustrate the installation of the collector feed line piping.
|Pipe fittings are measured, cut and fitted for the proper length. The installer has designed the collector feed piping installation in a manner that will allow the collector to drain.|
|Once all the piping and fittings have been attached correctly, the installer then solders them.|
|The return line piping on the roof is completed. Note that the piping was installed in a manner that allows proper draining of the liquid from the collector.
The next step will be insulating the piping.
|Go to next step: #5 Collector Return Line Plumbing|
|Back to Main Solar Water Heating System Installation Page|